View a markdown version of this page

Use ReplaceNetworkAclEntry with a CLI - AWS SDK Code Examples

There are more AWS SDK examples available in the AWS Doc SDK Examples GitHub repo.

Use ReplaceNetworkAclEntry with a CLI

The following code examples show how to use ReplaceNetworkAclEntry.

CLI
AWS CLI

To replace a network ACL entry

The following replace-network-acl-entry example replaces an entry for the specified network ACL. The new rule 100 allows ingress traffic from 203.0.113.12/24 on UDP port 53 (DNS) into any associated subnet.

aws ec2 replace-network-acl-entry \ --network-acl-id acl-5fb85d36 \ --ingress \ --rule-number 100 \ --protocol udp \ --port-range From=53,To=53 \ --cidr-block 203.0.113.12/24 \ --rule-action allow

This command produces no output.

For more information, see Network ACL rules in the Amazon VPC User Guide.

PowerShell
Tools for PowerShell V4

Example 1: This example replaces the specified entry for the specified network ACL. The new rule allows inbound traffic from the specified address to any associated subnet.

Set-EC2NetworkAclEntry -NetworkAclId acl-12345678 -Egress $false -RuleNumber 100 -Protocol 17 -PortRange_From 53 -PortRange_To 53 -CidrBlock 203.0.113.12/24 -RuleAction allow
Tools for PowerShell V5

Example 1: This example replaces the specified entry for the specified network ACL. The new rule allows inbound traffic from the specified address to any associated subnet.

Set-EC2NetworkAclEntry -NetworkAclId acl-12345678 -Egress $false -RuleNumber 100 -Protocol 17 -PortRange_From 53 -PortRange_To 53 -CidrBlock 203.0.113.12/24 -RuleAction allow